To address two of the feedbacks:
One of them, the months long wait was due to my actual job, I was not available to distribute the wrenches, this is not a normal thing. With that, I have now gotten to the point where I can keep stock of these flowing, so I shouldn’t run into any stock issues now. Please keep in mind that I have no control over the company that cuts the blanks for me, so the item may occasionally go out of stock.
Second, The square drive on these will be tight. This is by design, as the way they are manufactured, they have no divot for the socket wrench/extension ball bearing to lock into, nor do I have a way to do this currently. The snug fit is also intended to ensure that any up/down force applied will not push the tool off the extension. The drive was measured and tested against 3 different socket wrenches and multiple extensions for fitment. I apologize in advance for any tight fitment you may have, just please be aware of this when ordering. I do fit check each of these against the same extension before I ship them.
Thank you for your support! I have sold over 160 wrenches so far! Some people ordered more than one, but over 100 people are having a way easier time changing their fuel filter, make yourself the next!!! This fuel filter wrench, originally designed for the John Deere X700 Series tractor, will fit more including any X4/5/7 series diesel, 1023/25, 2025, etc… this wrench even fits Yanmar 3GM sailboat engines, and more, but some applications using this size wrench don’ fit the wrench! This style wrench changes that! I had a customer reach out with the need for something to fit on the ring in his Gator XUV 855M S4, as the filter is buried down and surrounded by the engine and other parts. This was my solution for him, and it expands the fitment for all! If you have a question about fitment, feel free to email me and I’ll help you out.
Made of water-jet cut 6061 T6 Aluminum, this tool perfectly fits the fuel filter ring and will not mar the surface like steel pliers. Filter bowl ring, extension, and socket wrench NOT included, filter ring tool only. Wrench is vibratory tumbled for an hour to soften and/or remove burrs, but edges may be sharp! The wrench is final finished with a glass bead blast. THIS SOCKET MAY NOT WORK WELL WITHOUT A SOCKET EXTENSION DUE TO THE LOCATION OF THE SQUARE DRIVE - Socket wrench head extends into splined area.
NOTICE: WRENCHES WILL SHIP ON FRIDAYS, ORDERS MADE ON FRIDAYS WILL SHIP THE FOLLOWING FRIDAY.
Specs:
Material: 6061 T-6 Aluminum
Finish: Glass bead blast
Thickness: 3/8” (0.375)
Drive: 3/8”
Fits: Yanmar PN: 110250-55610, John Deere PN: CH10106
Check out the videos!
https://youtu.be/hhceYZW1MIk
https://youtu.be/kErqgOvcpKU
https://youtu.be/o2vIA_CajRg
To address two of the feedbacks:
One of them, the months long wait was due to my actual job, I was not available to distribute the wrenches, this is not a normal thing. With that, I have now gotten to the point where I can keep stock of these flowing, so I shouldn’t run into any stock issues now. Please keep in mind that I have no control over the company that cuts the blanks for me, so the item may occasionally go out of stock.
Second, The square drive on these will be tight. This is by design, as the way they are manufactured, they have no divot for the socket wrench/extension ball bearing to lock into, nor do I have a way to do this currently. The snug fit is also intended to ensure that any up/down force applied will not push the tool off the extension. The drive was measured and tested against 3 different socket wrenches and multiple extensions for fitment. I apologize in advance for any tight fitment you may have, just please be aware of this when ordering. I do fit check each of these against the same extension before I ship them.
Thank you for your support! I have sold over 160 wrenches so far! Some people ordered more than one, but over 100 people are having a way easier time changing their fuel filter, make yourself the next!!! This fuel filter wrench, originally designed for the John Deere X700 Series tractor, will fit more including any X4/5/7 series diesel, 1023/25, 2025, etc… this wrench even fits Yanmar 3GM sailboat engines, and more, but some applications using this size wrench don’ fit the wrench! This style wrench changes that! I had a customer reach out with the need for something to fit on the ring in his Gator XUV 855M S4, as the filter is buried down and surrounded by the engine and other parts. This was my solution for him, and it expands the fitment for all! If you have a question about fitment, feel free to email me and I’ll help you out.
Made of water-jet cut 6061 T6 Aluminum, this tool perfectly fits the fuel filter ring and will not mar the surface like steel pliers. Filter bowl ring, extension, and socket wrench NOT included, filter ring tool only. Wrench is vibratory tumbled for an hour to soften and/or remove burrs, but edges may be sharp! The wrench is final finished with a glass bead blast. THIS SOCKET MAY NOT WORK WELL WITHOUT A SOCKET EXTENSION DUE TO THE LOCATION OF THE SQUARE DRIVE - Socket wrench head extends into splined area.
NOTICE: WRENCHES WILL SHIP ON FRIDAYS, ORDERS MADE ON FRIDAYS WILL SHIP THE FOLLOWING FRIDAY.
Specs:
Material: 6061 T-6 Aluminum
Finish: Glass bead blast
Thickness: 3/8” (0.375)
Drive: 3/8”
Fits: Yanmar PN: 110250-55610, John Deere PN: CH10106
Check out the videos!
https://youtu.be/hhceYZW1MIk
https://youtu.be/kErqgOvcpKU
https://youtu.be/o2vIA_CajRg
Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5